PIXMA G7070

Refillable Ink Tank Wireless All-In-One with Fax for High Volume Printing Designed for high volume printing at low running cost, this high performance wireless printer combines amazing compactness and a wide range of printing options for the complete home and small office printing experience.

Print, Scan,Copy,Fax
ISO standard print speed (A4): 13.0ipm black / 6.8ipm colour
Hi-speed USB 2.0, WiFi, wired LAN, wireless/wired LAN Pictbridge, Mopria, AirPrint, Direct Wireless
Recommended print volume: 150 to 1 500 pages

Specification

Print

Print Head / Ink
Type	Permanent (Replaceable)
Number of Nozzles	Total 1 792 nozzles
Ink Cartridges	GI-70 (Pigment Black / Cyan / Magenta / Yellow)
Printing Resolution	4 800 (horizontal)^*1 x 1 200 (vertical) dpi
*Print Speed^2** Based on ISO/IEC 24734 Click here for summary report Click here for Document Print and Copy Speed Measurement Conditions
Document (ESAT/Simplex)	13.0 ipm (black) / 6.8 ipm (colour)
Document (FPOT Ready / Simplex)	9s (black) / 14s(colour)
Photo (10.16 x 15.24cm (4 x 6in)) (PP-201/Borderless)	45s
Printable Width	203.2 mm (20.32cm), Borderless: 216 mm (21.59cm)
Printable Area
Borderless Printing^*3	Top/Bottom/Right/Left margin: Each 0 mm
Bordered Printing	#10 Envelope/DL Envelope: Top 8mm / Bottom 12.7mm / Right 5.6mm / Left 5.6mm 127 x 127mm: Top 6mm / Bottom 6mm / Right 6mm / Left 6mm 89 x 89mm / 10.16 x 10.16cm: Top 5mm / Bottom 5mm / Right 5mm / Left 5mm LTR / LGL: Top 3mm / Bottom 5mm / Right 6.3mm / Left 6.4mm Other: Top 3mm / Bottom 5mm / Right 3.4mm / Left 3.4mm
Bordered Auto 2-Sided Printing	Top / Bottom margin: 5mm Left / Right margin: 3.4mm (l: Left: 6.4mm, Right: 6.3mm)
Support Media
Rear Tray	Plain Paper (64 - 105g/m²) Photo Paper Pro Platinum (PT-101) Photo Paper Pro Luster (LU-101) Photo Paper Plus Glossy II (PP-201/PP-208) Matte Photo Paper (MP-101) Glossy Photo Paper "Everyday Use" (GP-508) High Resolution Paper (HR-101N) Photo Paper Plus Semi-Gloss (SG-201) Photo Stickers (PS-108/PS-208/PS-808) Removable Photo Stickers (PS-308R) Magnetic Photo Paper (PS-508) Envelope
Cassette	Plain Paper (64 - 105g/m²)
Paper Size
Rear Tray	A4, A5, B5, l, LGL, 10.16 x 15.24cm , 12.7 x 17.78cm, 17.78 x 25.4cm , 20.32 x 25.4cm Envelopes (DL, COM10), Square (12.7 x 12.7cm , 10.16 x 10.16cm , 89 x 89mm), Card Size (91 x 55mm) [Custom size] width 55 - 215.9mm, length 89 - 676mm
Cassette	A4, A5, B5, l [Custom size] width 148.0 - 215.9mm, length 210 - 297mm
*Paper Size (Borderless)^4**	A4, l, 10.16 x 15.24cm, 12.7 x 17.78cm, 17.78 x 25.4cm , 20.32 x 25.4cm Square (12.7 x 12.7cm , 10.16 x 10.16cm ,89 x 89mm), Card Size (91 x 55mm)
Paper Handling (Number)
Rear Tray	Plain Paper (A4, 64 g/m²) = 100 High Resolution Paper (HR-101N) = 80 Photo Paper: 10.16 x 15.24cm = 20, 12.7 x 17.78cm = 10
Cassette	Plain Paper (A4, 64g/m²) = 250
Support Media for Auto 2-sided printing
Type	Plain Paper
Size	A4, A5, B5, l
Paper Weight
Rear Tray	Plain Paper: 64 - 105g/m² Canon paper: paper weight: 300g/m² (Photo Paper Pro Platinum PT-101)
Cassette	Plain Paper: 64 - 105g/m²
Ink End Sensor	Electrode type and dot count type combined
Print Head Alignment	Auto/Manual

Scan^*5

Scanner Type	Flatbed
Scanner Method	CIS (Contact Image Sensor)
*Optical Resolution^6** Optical resolution scan is available, only when you use TWAIN Driver.	1 200 x 2 400 dpi
Scanning Bit Depth (Input/Output)
Grayscale	16 bit/8 bit
Colour	RGB each 16 bit/8 bit
*Line Scanning Speed^7**
Grayscale	1.5 ms/line (300 dpi)
Colour	3.5 ms/line (300 dpi)
Document Size
Flatbed	A4/l(216 x 297mm)
ADF

Copy

Document Size
Flatbed	A4/l (216 x 297mm)
Compatible Media
Size	A4/A5/B5/l/LGL/10.16 x 15.24cm/12.7 x 17.78cm/ Square (12.7 x 12.7cm )/Card Size (91 x 55mm)
Type	Plain Paper Photo Paper Pro Platinum (PT-101) Photo Paper Pro Luster (LU-101) Photo Paper Plus Semi-Gloss (SG-201) Glossy Photo Paper "Everyday Use" (GP-508) Matte Photo Paper (MP-101) Photo Paper Plus Glossy II (PP-201) Photo Paper Plus Glossy II (PP-208)
Image Quality	3 positions (Economy, Standard, High)
Density Adjustment	9 positions, Auto intensity (AE copy)
*Copy Speed^8** Based on ISO/IEC 24734 Click here for summary report Click here for Document Print and Copy Speed Measurement Conditions
Document (Colour) (sFCOT/Simplex) / (sESAT/Simplex)	22s /3.9 ipm
Multiple Copy
Black/Colour:	99 pages

Fax

Type	Desktop Transceiver (Super G3 / Colour Communication)
Applicable Line	PSTN
*Transmission Speed^9**	3s (black) / 1m (colour)
Fax Resolution
Black	8 pels/mm x 3.85 lines/mm (Standard) 8 pels/mm x 7.7 lines/mm (Fine) 300 dpi x 300 dpi (Extra Fine)
Colour	200 × 200 dpi
Print Size	A4, l, LGL
Scanning Width	208 mm (A4), 214 mm (l)
Modem Speed	33.6 kbps (Automatic fall back)
Compression
Black	MH, MR, MMR
Colour	JPEG
Gradation
Black	256 levels
Colour	24 bit Full colour (RGB each 8 bit)
ECM (Error Correction Mode)	ITU-T T.30 compatible
Automatic Dialling
Group Dialling	19 locations
*Transmission/Reception Memory^10**	50 pages

PC Fax

Type	Windows / Mac
Destination Number	1 location
Black/Colour	B/W transmission only

Network

Protocol	SNMP, HTTP, TCP/IP (IPv4/IPv6)
Wired LAN
Network Type	IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)
Data Rate	10M/100Mbps (auto switchable)
Wireless LAN
Network Type	IEEE802.11n / IEEE802.11g / IEEE802.11b
Frequency Band	2.4 GHz
Channel^*11	1 - 13

Security	WEP64/128 bit WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES)
Direct Connection (Wireless LAN)	Available

Printing Solutions

AirPrint	Available
Windows 10 Mobile	Available
Mopria	Available
Canon Print Service (for Android)	Available
PIXMA Cloud Link (from smartphone/tablet)	Available
Easy Photo-Print Editor (for iOS/for Android)	Available
Canon PRINT Inkjet/SELPHY (for iOS/for Android)	Available

System Requirements^*12

Windows 10 / 8.1 / 7 SP1
(operation can only be guaranteed on a PC with a pre-installed Windows 7)

OS X 10.11.6
macOS 10.12～ macOS 10.14

General Specifications

Operation Panel
Display	5.08cm
Language	32 Selectable Languages: Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese / Norwegian / Swedish / Danish / Finnish / Russian / Czech / Hungarian / Polish / Slovene / Turkish / Greek / Simplified Chinese / Traditional Chinese / Korean / Indonesian / Slovakian / Estonian / Latvian / Lithuanian / Ukrainian / Romanian / Bulgarian / Thai / Croatian / Vietnamese
Interface	Hi-Speed USB 2.0
PictBridge (Wireless LAN / LAN)	Available
*Operating Environment^13**
Temperature	5 - 35°C
Humidity	10 - 90% RH (no dew condensation)
*Recommended Environment^14**
Temperature	15 - 30°C
Humidity	10 - 80% RH (no dew condensation)
Storage Environment
Temperature	0 - 40°C
Humidity	5 - 95% RH (no dew condensation)
Quiet Mode	Available
Acoustic Noise (PC Print)
Plain Paper (A4, B/W)^*15	47.0 dB
Power	AC 100-240 V, 50/60 Hz
Power Consumption
OFF	0.3 W
Standby (scanning lamp is off) USB connection to PC	1.0 W
Standby (all ports connected, scanning lamp is off) [EU only - for ErP Lot 26 regulation]	1.8 W
Time to enter Standby mode [EU only - for ErP Lot 26 regulation]	11m 10s
Copy^*16 USB connection to PC	15 W
Environment
Regulation	RoHS (EU, China),WEEE (EU)
Duty Cycle	5 000 pages/month
Dimension (WxDxH)
Factory Configuration	403 x 369 x 234mm
Output/ADF trays extended	403 x 701 x 305mm
Weight	9.6kg

Page Yield

Plain Paper (A4 pages) (ISO/IEC 24712 test file)^*17	Standard^18: GI-70 PGBK: 6 000 GI-70 C/M/Y: 7 700 Economy^19: GI-70 PGBK: 8 300 GI-70 C/M/Y: 7 700
Photo Paper PP-201, 4 x 6" (ISO/IEC 29103 test file)^*17	Standard: GI-70 PGBK: NA GI-70 C/M/Y: 2 200

Ink droplets can be placed with a pitch of 0.000529167cm
Document print speeds are the average of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734.
Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper.
Plus Glossy II and does not take into account data processing time on host computer.
Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
Paper Type NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfer, Photo Stickers.
Paper types NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfer.
TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating system.
Optical resolution is a measure of hardware sampling resolution, based on ISO 14473 standard.
The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included.
Copy speeds are the average of sFCOT and sESAT, ISO/IEC 29183.
Copy speeds (ADF) are ESAT of copy in sequence, ISO/IEC24735.
Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used etc. and does not take into account warm-up time.
Black &white document fax transmission speed is based on default setting using ITU-T No.1 chart. Colour document fax transmission speed is based on default setting using Canon Colour Fax Test Sheet. Actual transmission speed may vary depending on document complexity, fax settings at receiving end, and line conditions etc.
Page count is based on ITU-T No.1 chart or Canon FAX Standard Chart No.1.
1-11 in US, CND, LTN, BRA, TW and HK.
Please visit https://asia.canon to check OS compatibility and to download the latest driver updates.
The performance of the printer may be reduced under certain temperature and humidity conditions.
For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
Acoustic Noise is measured based on ISO7779 standard with default setting.
Copy: When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
Declared yield value in accordance with ISO/IEC 24711 (for A4 size) using ISO/IEC 24712 test file, and ISO/IEC 29102 (for 4x6" size) using ISO/IEX 29103 test file. Values obtained by continuous printing.
This printer is a monochrome printer.
Print colour document with optional colour cartridge.
Once the installed colour cartridge is depleted, please replace with a new colour cartridge or a contact protector has to be installed.
The economy mode reduces the black ink consumption by lowering the density, 38% more pages than the standard mode can be printed.

Disclaimer

•	You need to install ink bottles of all colours whether you perform black and white printing or colour printing. If any of the ink bottles is not installed, an error occurs and you cannot perform printing.
•	Even when black-only or grayscale printing is selected, depending on the printing material and driver settings used, colour inks might still be consumed when printing. When the remaining ink level of any ink tank falls below the lower limit line, Canon recommends that you refill that ink bottle with the corresponding colour of ink.
•	During the initial printer setup, a certain amount of ink is used to fill the print head's nozzles with ink. Therefore, the page yield of the initial bundled set of ink bottles will be lower than that of the subsequent sets of bottles.
•	To keep printer's performance, Canon printer performs cleaning automatically according to its condition. When the printer performs cleaning, a small amount of ink is consumed. In this case, all colours of ink may be consumed. [Cleaning function] The cleaning function helps the printer to suck air bubbles or ink itself from the nozzle and thus prevents print quality degradation or nozzle clogging.
•	The repairing parts for printers will be available five years after production is discontinued. Depending on your model, we may ask you to replace it with a new one, or one with almost the same performance as a maintenance service. In this case, it may be that you cannot use supplies or accessories for your model or the compatible OS will be changed.
•	The warranty term for details, contact a Canon-authorized sales representative in the country or region you live in. The warranty covers only the printer main body excluding consumables such as print media and ink / ink bottles even during the warranty period.
•	To obtain good printing quality, use up ink within six months after opening.
•	Please take note that if the printer fault or breakdown is due to the usage of non-genuine inks, repair charges are applicable even if the claim is within the warranty period.
•	Using non-genuine inks may affect the printer's performance and / or the print quality. In some rare occasions, although there are no safety issues, using non-genuine inks has caused overheating of the print head and smoke emission from the print head due to the absence of an ingredient found in genuine ink. (Does not apply to usage of all non-genuine inks).
•	Depending on your terminal, such as a computer or a smartphone, or the operating system of your terminal, such as your computer or smartphone, the estimated ink level information or message displayed on the screen of your terminal may be different from the information or message displayed on the operation panel of the printer. Also, a part of the estimated ink level message displayed on the operation panel of the printer may not be displayed and / or may be displayed at a different point in time. Canon recommends that you use the information and message displayed on the operation panel of the printer as your reference. Note, however, that such information and message are displayed items serve only as a guideline information.
•	Information on Received Faxes By default, received faxes will be printed immediately after they are received. In addition, faxes will be stored in the printer’s memory automatically when they are received. However, the printer’s memory has an upper limit on the number of faxes or subjects it can contain. When the amount of stored fax reaches the upper limit of the printer’s memory, faxes stored latest will overwrite those stored earliest. As long as paper is loaded, the printer will perform printing even when the ink remaining is insufficient. Therefore, in case ink remaining is low, printed faxes may be unclear due to blurring of ink. In such case if the amount of stored faxes has reached its upper limit of the printer’s memory, faxes stored in the printer’s memory will be deleted in order from the earliest. As a result, you may not be able to see faxes either using printed material or the printer’s memory. Therefore, if you use the fax capabilities, make sure sufficient ink remains in the ink tank in advance. In addition, we recommend you refill the ink tank early so that ink does not become insufficient while fax printing is in progress. Visually inspect the remaining ink in the printer’s ink tank. Moreover, we recommend you check printed pages immediately after faxes are received. If a fax remains in the printer’s memory, you can reprint it after refilling the ink tank. If [Do not print] is selected for [Received documents] on [Auto print settings] under [FAX settings] on the operation panel of the printer, received faxes will not be printed immediately. Instead, faxes are stored in the printer’s memory automatically and you can select and print those stored from the printer’s memory. In this setting, the printer does not receive faxes if the printer’s memory reaches its upper limit. Thus, stored faxes are not overwritten automatically.

All prices above are inclusive of all taxes.

PIXMA G7070

PIXMA G7070

Specification

A4 Canon Ink Tank Printers